Loading Dock Lifts

Loading dock lifts are intended to reduce man-hours and improve safety where there are no loading dock facilities. A lift raises materials to the truck by means of hydraulic cylinders. Loading dock lifts are engineered for maximum safety, minimize the risk of injury, and vastly improve time to market efficiency. Each unit features easy to use controls in the form of a push button, 24V AC on a 20 foot long coil cord. The pre-wired control box includes a magnetic starter and overload fuse, and an emergency velocity fuse stops momentum in the event of a line break.

Loading dock lifts also feature high visibility, removable handrails with fixed toe boards. The checkered deck plate on each unit is made from heavy gauge steel and will last for many years. The perimeter of the platform is surrounded by beveled toe-guards and electric toe-guards to prevent slips and falls. The electric toe-guard is a patented feature that is essential to the safety of personnel. It is made from L-shaped aluminum extrusion and hangs below the entire perimeter of the deck. This is important, because if the loading dock lift is being lowered while an object, hand, or foot crosses its path, the guard will be triggered and the unit will electrically stop the table from lowering. When the object is removed, the table once again begins to move. It is not necessary to reset the unit.

Toe-guard provisions are standard OSHA and ANSI safety measures used on a variety of platforms and are likewise constituted into the loading dock lift for compliance protocol. The scissor table loading dock lift is as well semi-portable, and can be operated up to 8 feet in other places cherish the 6.5 HP motor that drives it.

Manufacturers can moreover customize loading dock lifts and any bulk of alternatives solicited at the episode of purchase. These options carries with it, but are not limited, to the after:

Cut up ALUMINUM TRUCK BRIDGE

The usual steel bridge can be put back along furthermore an aluminum bridge measuring 72" wide x 18" lengthy. This is advisable for administration applications.

Cut up STEEL BRIDGE

If central, an spare 72" wide x 18" extensive hack steel bridge can be spare to the opposite closest of casing.

REMOVABLE HANDRAILS/TOEBOARDS

This is advantages every time the container is mounted in a pit. The more handrails and toe boards allows the loading dock lift to be flush also the floor for fork truck cross traffic.

Lesson BEEPER & STROBE

In areas of bucketing chap trade, this devotes an additional safety precaution. The beeper sounds at 80 decibels- loud enough to be heard more than certain illuminate machinery.

More Arrival RAMPS

Your vendor can further fit the loading dock lift along furthermore spare coming ramps and hydraulic lines. Coming ramps can be procured take pleasure in your vendor for lowered attribute lifts of 8-12, depending on the size of the extra ramp. Arrival ramps must be anchored to the floor.

Further STRUCTURAL Way AND SUPPORTS FOR DECK

Convenient for bucketing mission construction, this increases the rollover aptitude of the loading dock lift up to 50,000 lbs., 25,000 lbs. per axle.

Security ACCORDION SKIRTS

Take staff and debris bask in attaining not up to the loading dock lift. We advocate purchaser installed skirts to avoid freight ruin.

Automated WHEEL CHOCKS

As the casing lifts, this choice will weigh down the dock end of the ramp to evade roll off. Wheel clocks imply a special pit mount.

Bring to an end Symbol Indication

As the truck approaches the loading dock lift, the clue raises to let the driver fathom each time to end for sheltered loading/unloading.

KEY LOCK Operation

This halts unauthorized use of the lift by locking out the dominates.

TWO Momentum PUMP

Raise exciting pace by 55 when lift is unloaded. This is commendable for unloading applications.

2-10HP Optional Voltage UNITS

Ask your manufacturers representative close to which motor will book suitable for your process. Both internal and external electricity units are obtainable.

Special COATINGS

Freezing galvanized coating is intended for clean up trailing applications and wet environments. STEEL-IT COATING is organized for incidental cuisine articulation and shower bringing up the rear environments. FDA sanctioned.

OIL HEATER

This accessory keeps the loading dock lift acting smoothly in serious freezing. The holder is armed plus a thermostat for automation bake sway.


Almost about the Originator

Easyrack.org. For more information on

Relaited Links:

• Why Some People Fail in Business While Others Win
• Marketing 101: Basic Information on Marketing Products and Services
• Top 10 Reasons Your Dental Patients Dont Come Back, or Come at All